Description

Originally designed for and approved by MOD for use in fighting vehicles, this style carries their own FV designations. Available from 4 to 20 ways in pairs, with bussing links if necessary, the design can be surface panel mounted or through panel soldered as appropriate to the installation. These blocks have an exceptional resistance to commonly used fuels and hydraulic fluids. They are non-flammable with low smoke and toxic emissions under fire conditions.

Features

• Operating temperature -65¡ÆC to +210¡ÆC.
• Non-flammable with low smoke and toxic fume emission under fire conditions.
• Exceptional resistance to commonly used fuels and hydraulic fluids.
• Available with plain terminals for through panel applications.
• Choice of six colours
• Approved to M.V.E.E. specification no. 2051 (General Requirements for Electrical Equiptment for Fighting Vehicles) Environmental Category 07-55 Parts 1 and 2.

< Back to Products

Specification

Current Rating: 4 BA inserts - N/A, 4 BA inserts + link - 20A, 4 BA solder bucket - 25A, 4 BA solder bucket + link - 20A
Proof Voltage (Sea Level): 2000V DC or AC peak
Working Voltage (recommended max): 500V DC or AC peak
Insulation Resistance: Between terminals = 100M§Ù, Terminals to earth = 200M§Ù
Number of terminals: Double row - 2,4,6,8,10,12,14,16,18 & 20
Insert Pitch: 9.53mm (.375")
Terminations: 4 BA insert with plain back, 4 BA insert with solder bucket back
Acceptance Tag Width: 7.11mm (.280") Maximum
Recommended Torque: 0.9Nm (8.0 lbf.in.)
Operating Temperature Range: -65¡ÆC to +210¡ÆC
Moulding: Glass filled polythersulphone
Colours: Red, black, blue, green, yellow and white